Blog

Do smoke alarms need to be hardwired in Queensland?

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

Not always. Queensland allows smoke alarms that are hardwired to mains power or powered by a 10-year non-removable battery. But if your existing alarms are hardwired, their replacements must be hardwired too, and new homes and major renovations need hardwired alarms. Every alarm must also be photoelectric, AS 3786-2014 and interconnected.

What power options does the law allow?

The regulation gives two options for each alarm:

  • Hardwired to the home’s electricity supply. These still have a backup battery inside so they keep working in a blackout.
  • A battery built in so it can’t be removed, made to power the alarm for at least 10 years without recharging.

What’s out is the old style alarm with a 9 volt battery you pop in and out. Those don’t meet the rule, whatever sensor they have. The Queensland Fire Department’s checklist puts it plainly: hard-wired to mains power, or powered by a 10-year non-removable battery.

When do smoke alarms have to be hardwired?

Two situations:

  • You already have hardwired alarms. The Fire Department’s fact sheet says if your current smoke alarms are hardwired, replacements must also be hardwired. The Act says the same about replacing a hardwired alarm. So you can’t pull a mains alarm off the ceiling and stick up a battery unit to save on the electrician.
  • New homes and substantial renovations. The building rules for new dwellings require alarms that are hardwired and interconnected.

If your home was built in the last few decades, there’s a fair chance at least some of your alarms are already hardwired. Look for a wired base on the ceiling behind the alarm, or a small green or red light that stays on.

Who can install a hardwired smoke alarm?

Only a licensed electrician. Connecting anything to the mains is electrical work under the Electrical Safety Act, and the Fire Department’s fact sheet says hardwired alarms must be installed by a qualified electrician. DIY electrical work in Queensland is illegal, and the Electrical Safety Office warns your insurer may refuse a claim if a fire traces back to unlicensed work.

Sealed 10-year battery alarms are different. The Fire Department says wireless alarms with a non-removable battery connect without wiring and can be installed by the owner, as long as they aren’t replacing a hardwired alarm.

Can hardwired and battery alarms be linked together?

Often, yes. The law needs every alarm in the home interconnected with every other one. It doesn’t need them all on the same power type. Several hardwired alarm ranges include a wireless link that talks to matching sealed battery alarms from the same range.

That’s useful in older peninsula homes where the hallway alarm is hardwired but the bedrooms have no wiring and no easy roof access. An electrician replaces the hardwired one with a compliant hardwired unit, then adds matching battery alarms in the bedrooms. Alarms from different brands usually won’t talk to each other, so the whole set has to be planned together.

Which is better, hardwired or 10-year battery?

Both comply. The differences are practical:

  • Hardwired runs off mains with a backup battery. It’s what new homes get and it’s the only option if you already have hardwired alarms.
  • Sealed battery needs no cabling, which helps in homes with no roof space. When the battery is done, the whole alarm gets replaced, which lines up with the 10 year replacement rule anyway.

Most homes we see end up with a mix: hardwired where wiring already exists, wireless linked units where running cable would mean cutting into finished ceilings.

How do I know which setup my home needs?

It depends on what’s on your ceiling now, your roof access, and how many alarms the layout needs. Fins Up Electrical will check the existing alarms, tell you which ones must stay hardwired, and quote the full compliant setup free and fixed before we start. More on our smoke alarm installation page, or read how many smoke alarms you need.

Want this sorted? Smoke alarm installation from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

Can I replace a hardwired smoke alarm with a battery one in QLD?

No. If your current smoke alarms are hardwired, the replacements must also be hardwired, and a licensed electrician has to install them.

Are 9 volt battery smoke alarms legal in Queensland?

No. Battery alarms must have a non-removable battery that lasts at least 10 years. Alarms with a removable 9 volt battery don’t comply.

Do new houses in QLD need hardwired smoke alarms?

Yes. New homes and substantially renovated homes must have hardwired, interconnected photoelectric smoke alarms.

Sources

The service