Fins Up Electrical

Renovations and fit-outs

Licensed electrician based in Scarborough, working across the Redcliffe peninsula and Moreton Bay. Call 0432 304 126.

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

We are the renovation electrician for kitchens, bathrooms, shops and offices across Redcliffe, the peninsula and out to Caboolture. We move lights and outlets, add circuits for new appliances, upgrade the board, and leave the walls ready for the plasterer and the painter.

Fins Up Electrical is a licensed electrical contractor (licence 91921) with 16 years on the tools. You deal with Andrew from the first call, through the quote, to the final test. We work in homes people are living in and in shops and offices that need to open on time.

Renovations go wrong when the electrical is left to the end. Bring us in at the planning stage and we tell you what the existing wiring and board can carry before the cabinet maker and the tiler are booked.

What's included

  • Site visit and a plan for lights, points and switches before demolition
  • Strip-out of old wiring and making safe
  • New circuits for ovens, cooktops, dishwashers and air conditioning
  • Moving or adding lights, power points and switches
  • Downlights, pendants and feature lighting
  • Bathroom wiring, including mirror lights and fans
  • Switchboard upgrade where the old board cannot cope
  • Testing and tidy-up before the trades that follow

Kitchens and bathrooms

These are the rooms where the electrical changes the most. A new kitchen usually means a different oven and cooktop position, more power points above the benchtop, an island with power, and lighting under the cupboards and overhead. A bathroom often gets a new vanity light, a mirror with its own lighting, and an exhaust fan.

We rough in the wiring once the old fittings are out, then come back to fit off when the cabinets, tiles and paint are done. If you are upgrading to an induction cooktop or a bigger oven, the circuit and the cable have to suit it. We check that before the appliance arrives. See oven and cooktop installation for more.

Shops, offices and fit-outs

A commercial fit-out runs to a date. We plan the lighting layout, power and data points with you, work around the builder, and do the fit-off when the finishes are in. We have done court lighting for the Redcliffe Leagues Netball Association and work for a real estate agency, so we are used to schedules and sites that stay open.

For ongoing building maintenance after the fit-out, see commercial electrician.

Moving lights and outlets, upgrading the board

Most renovations need a few lights or outlets moved. Cabling goes in new routes, old cable is made safe, and the plasterer patches what we open. If a renovation adds an air conditioner, a new oven or an EV charger, the board may no longer have the room or the protection to carry it. We check the existing board first and quote an upgrade only where it is needed. See switchboard upgrades.

What decides the quote

No figures here, because every renovation is different. The quote depends on the age and condition of the existing wiring, how much we have to open up, the number of circuits and fittings, whether the board needs work, and how far the site is from Scarborough. We visit, we look, and we quote fixed and free before any work starts.

Licensed and insured

In Queensland, electrical work must be done by a licensed electrician. That includes moving a power point or a light. Fins Up holds electrical contractor licence 91921 and carries public liability insurance. You deal with Andrew direct, Monday to Saturday, open 24 hours, and we travel up to 60km from Scarborough.

Need renovation electrical? Ring us.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

When should the electrician come in on a renovation?

At the planning stage, before demolition and before the cabinet maker and tiler are booked. We then rough in after strip-out and fit off after the finishes.

Can you move power points and lights?

Yes. We run new cable, make the old wiring safe and fit the new positions. The plasterer then patches the walls.

Will my switchboard need upgrading?

Not always. We check the existing board against the new loads, like an oven, cooktop or air conditioner, and only quote an upgrade where it is needed.

Do you do shop and office fit-outs?

Yes. We plan lighting, power and data with you and fit off to the builder’s dates so you can open on time.