To test a safety switch, press the button marked T or Test on the switch in your switchboard. The switch should trip straight away and cut power to the circuits it protects. The Electrical Safety Office recommends doing this every three months. If it doesn’t trip, call a licensed electrician, because the switch may not protect anyone.
Where are the safety switches in my switchboard?
Open the switchboard door, usually in or beside the meter box. Safety switches have a small button labelled T or Test, and plain circuit breakers have no button at all. Some boards have one or two safety switches covering several circuits. Newer boards may have a combined unit on each circuit, each with its own test button.
If nothing on the board has a test button, you probably have no shock protection at all. Read safety switch vs circuit breaker for how to tell them apart.
What’s the right way to test one?
- Warn the household. Lights and power will go off on those circuits.
- Save anything open on the computer and turn off sensitive gear if you’re worried about it.
- Press the T button firmly.
- The lever should flick to the off position straight away.
- Push the lever back up to on.
- Reset any clocks on the oven or microwave.
Pressing the button and resetting the lever is all a homeowner should do. Everything behind the switchboard cover is a job for a licensed electrician.
How often should I test my safety switch?
Every three months, says the Electrical Safety Office. Pick a date you’ll remember, like the change of season. A switch that has sat for years without moving can stick, and the test button is the only way you’ll know before it matters.
What if it doesn’t trip when I press test?
Then it isn’t doing its job. Leave it as is and book an electrician. A safety switch that fails the test needs replacing, and the circuits it covers have no shock protection until it is. Don’t keep pressing the button harder or tapping the switch.
What if it trips and won’t reset?
If the lever won’t stay up after a test, something on that circuit is leaking current to earth. It might have been there all along. Turn off and unplug appliances on that circuit and try again. If it holds once something is unplugged, that appliance is the likely cause. If it still won’t hold, there’s a wiring fault. Our post on a safety switch that keeps tripping covers the common causes.
Who can check or replace a faulty safety switch?
Fins Up Electrical tests, replaces and adds safety switches across the Redcliffe peninsula and Moreton Bay. Andrew can also tell you whether your board needs more of them. We’re open 24 hours Monday to Saturday and quote free before any work starts. Licence 91921. See switchboard upgrades and safety switches.
Want this sorted? Switchboard upgrades from Fins Up.
Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.
Common questions
How often should a safety switch be tested?
The Electrical Safety Office recommends pressing the test button every three months.
Will testing the safety switch damage my appliances?
No. It cuts the power the same way a blackout does. Reset your clocks afterwards.
My safety switch didn’t trip when I pressed test. Is that dangerous?
Yes. The circuits it covers have no shock protection. Book a licensed electrician to replace it.