A safety switch protects people. It cuts the power within milliseconds when it detects current leaking to earth, like through someone touching a faulty appliance. A circuit breaker protects the wiring. It cuts the power when too much current flows, which stops cables overheating. Most homes need both, and many older boards only have breakers or fuses.
What does a safety switch do?
A safety switch, also called an RCD or residual current device, watches the current going out on a circuit and the current coming back. If they don’t match, some current is escaping somewhere it shouldn’t, possibly through a person. The switch cuts the power within milliseconds.
The Electrical Safety Office calls safety switches insurance against electric shock. They stop the current flowing through a person, which avoids serious shock and electric burns.
What does a circuit breaker do?
A circuit breaker protects the cable on its circuit. Each cable can only carry so much current before it heats up. Plug in too many heaters, or have a short circuit, and the current spikes. The breaker trips before the wiring overheats and starts a fire.
Fuses do the same job as circuit breakers, in an older way. The Electrical Safety Office is clear that circuit breakers and fuses don’t protect people directly. Only safety switches do.
How can I tell which ones I have?
Look at your switchboard:
- Safety switches have a button marked 'T' or 'Test'. The button can be blue, white, black or orange.
- Circuit breakers are switches with no test button.
- Ceramic fuses are white plug-in holders with no switch at all.
Some devices combine both jobs in one unit, usually called an RCBO. They have a test button and protect a single circuit from both overload and leakage. If you’re not sure what’s on your board, press each test button and see which lights and power points go off. Those circuits are protected. Turn it back on after.
Which circuits need a safety switch?
In Queensland, the Electrical Safety Office says:
- Homes built or extended since 1992 need safety switches on power point circuits.
- Homes built since 2000 need them on all power point and lighting circuits.
- Homes that are sold or rented must have them on power point circuits within 90 days.
The Electrical Safety Office also recommends safety switches on every circuit in the home, including air conditioning, oven, hot water and pool equipment, even if they’re on a separate tariff. Many older homes only have one safety switch covering the power points, with lights, oven and air con unprotected.
Why does my safety switch trip but not the breaker?
Because they’re watching for different things. A breaker trips on too much current. A safety switch trips on leakage. A wet outdoor power point, a faulty kettle or a damaged cable can leak current without drawing much at all, so the safety switch trips and the breaker doesn’t notice.
Unplug everything on the circuit and try resetting it. If it still trips with nothing plugged in, or won’t reset, the Electrical Safety Office says the circuit likely has a fault that needs a licensed electrician. Never bypass a safety switch to stop it tripping. See our electrical repairs page for fault finding.
How often should I test my safety switches?
Every three months, the Electrical Safety Office recommends. Press the test button. The switch should flick off and cut power to its circuits. Then turn it back on. If it doesn’t trip, get an electrician to check it straight away. For circuits with a fridge or air conditioner, wait two to three minutes before resetting.
If your board is short on safety switches, Fins Up Electrical can add them or upgrade the board. Free fixed quote before we start, licence 91921. See our switchboard upgrades page.
Want this sorted? Switchboard upgrades from Fins Up.
Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.
Common questions
Is an RCD the same as a safety switch?
Yes. RCD stands for residual current device, which is the technical name for a safety switch.
Can a circuit breaker stop me getting electrocuted?
No. Circuit breakers protect wiring from overload. Only a safety switch cuts the power fast enough to protect a person from shock.
Can I install a safety switch myself?
No. In Queensland only a licensed electrician can install a safety switch. DIY electrical work is dangerous and illegal.
How long does a safety switch last?
The Electrical Safety Office says safety switches are made to last 4000 tests under the current standard, so they should last a long time if they’re working properly.