Blog

Can I install my own EV charger?

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

No. In Queensland, a wall-mounted EV charger is hardwired electrical work, and only a licensed electrician can connect it. You can buy the charger yourself, but it must be wired in by someone licensed. DIY electrical work is illegal, carries heavy fines, and can void your insurance if something goes wrong.

Why can’t I wire in an EV charger myself?

Queensland law says anyone doing electrical work must hold an electrical work licence for it. The Electrical Safety Office is blunt: DIY electrical work is unlicensed electrical work, it’s illegal, and individuals face heavy fines. It also says it isn’t illegal to buy appliances that need to be hardwired, but they must be connected by a licensed electrician. A wall charger is exactly that.

What could go wrong with a DIY EV charger?

An EV charger isn’t a lamp. It pulls a large current for hours at a time, often overnight while everyone’s asleep. Get the cable size, connections or protection wrong and the result is heat. Heat in a wall or a garage full of stuff is how fires start.

Other things a DIY job misses:

  • Checking the home’s maximum demand. Energex requires the installing electrician to assess this before fitting the charger.
  • The right safety switch protection for the charger.
  • Phase balancing on three-phase homes.
  • Lodging the paperwork with the network.

The Electrical Safety Office also warns that if a fire comes from illegal electrical work, your insurer may refuse the claim.

What about plugging the car into a normal power point?

That’s not installing anything. Using the portable charging cable that came with your car in an existing power point is just using an appliance. Energex says charging from a 10 or 15 amp power point is fine, subject to the existing installation being suitable.

Things to check:

  • The point is in good condition, not cracked, loose or discoloured.
  • The circuit is protected by a safety switch. Test it with the T button.
  • You’re not running the charge cable through an extension lead or power board.

If the plug or point gets warm, stop using it and get it looked at. That’s a job for our repairs and fault finding service.

What can I do myself to get ready?

Plenty that isn’t electrical work:

  • Choose where the car parks and where the cable will reach the charge port.
  • Pick the charger. Check it suits your car and, if you have solar, whether it can use your excess power.
  • Take photos of your switchboard and the spot you want the charger.
  • Find out if your home is single-phase or three-phase. Your electrician can confirm.

Having that ready makes the quote fast and accurate.

What does a licensed install include?

More than screwing a box to the wall. A proper install covers:

  • Checking the switchboard has room for a new circuit and the right protection.
  • Working out the home’s maximum demand with the charger added, as Energex requires.
  • Sizing the cable for the charger’s current and the length of the run, so it doesn’t run hot.
  • Fitting the charger to the maker’s instructions and the wiring rules, AS/NZS 3000.
  • Testing the circuit and the safety switch before it goes live.
  • Setting up the charger’s app or solar settings if it has them.

If your board is old or full, it may need work first. See switchboard upgrades.

How do I check an electrician is licensed?

Ask for their electrical contractor licence number and check it’s current using the Electrical Safety Office’s online licence search before any work starts. Licensed contractors in Queensland must carry public liability insurance. Unlicensed work doesn’t come with that protection.

Fins Up Electrical holds contractor licence 91921 and carries public liability insurance. We install home chargers across the Redcliffe peninsula and Moreton Bay and give a free fixed quote before we start. See EV charger installation.

Want this sorted? EV charger installation from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

Can I buy my own EV charger and get an electrician to install it?

Yes. Buying a hardwired appliance isn’t illegal. It just has to be connected by a licensed electrician.

Is DIY electrical work illegal in Queensland?

Yes. The Electrical Safety Office treats it as unlicensed electrical work, which is illegal and carries large fines.

Can I charge my EV from a normal power point?

Yes, with the cable that came with the car, if the existing point and circuit are suitable. Don’t use extension leads or power boards.

Sources

The service