The usual signs a house needs rewiring are switches or power points that feel warm, lights that flicker or dim for no reason, a burning smell, an old fuse board, and cable with rubber or fabric insulation that has gone brittle. One sign on its own often means a single faulty circuit. Several at once in an older home usually means the wiring itself has reached the end of its life, and a licensed electrician should test it.
What are the warning signs of old or faulty wiring?
These are the ones we see most in older homes around the peninsula:
- Warm or discoloured switch plates and power points. Heat means resistance, usually a loose or worn connection.
- Lights that flicker or dim when an appliance starts.
- A burning or hot plastic smell with no obvious source.
- A safety switch or breaker that trips again and again.
- Tingles from a tap, an appliance or a metal fitting.
- Ceramic fuses in the meter box, or no safety switch at all.
- Cable that crumbles when it is disturbed, found in the roof or under the house.
How old does wiring have to be before it’s a problem?
Age alone doesn’t condemn wiring. The insulation type matters more. Older rubber insulated cable breaks down with heat and time, and once it cracks the copper inside is exposed. Fabric covered cable has the same issue. Modern TPS cable with plastic insulation lasts much longer.
Heat in the roof speeds it up. A Queensland roof space in summer is hard on any cable, and cable that sat under old halogen downlights for years often shows it first.
Can a house be partly rewired?
Often, yes. If testing shows one or two circuits are worn and the rest are sound, those circuits can be replaced on their own. A full rewire makes sense when most circuits fail testing, when the home is being renovated anyway and the walls are open, or when the switchboard is being replaced at the same time.
We test first and tell you which circuits need work. You decide from there.
Is it safe to keep living in a house with old wiring?
That depends on what testing finds. Plenty of older homes have wiring that tests fine. The real danger sign is heat, smell, sparks or shocks. If you have any of those, turn off the affected circuit at the switchboard and stop using it until it has been checked.
A safety switch on every circuit is the single biggest safety step for an older home. If your board has none, read our post on old ceramic fuse boards.
Who can check and replace house wiring in Queensland?
Only a licensed electrician. In Queensland, wiring work is electrical work and the law doesn’t allow homeowners to do it. Testing needs proper instruments too, since a lot of worn cable looks fine from the outside.
Fins Up Electrical tests and replaces wiring in homes from Scarborough out to Caboolture. Andrew finds the problem circuits and gives you a free fixed quote before any work starts. See our electrical repairs and switchboard upgrades pages.
Want this sorted? Electrical repairs from Fins Up.
Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.
Common questions
How do I know if my wiring is faulty?
Warm switches or power points, flickering lights, a burning smell, repeated tripping and tingles are the common signs. A licensed electrician confirms it with testing.
Does a whole house always need rewiring?
No. Testing often shows only some circuits are worn, and those can be replaced on their own.
Can I replace old wiring myself?
No. In Queensland wiring is electrical work and must be done by a licensed electrician.