Blog

Fishy smell in the house: when it’s electrical

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

A fishy smell with no obvious source is often an overheating electrical part. The plastics and resins in power points, switches, light fittings and appliance plugs give off a fishy or urine-like smell as they start to cook, so treat it as an early warning and find where it’s coming from.

Why does an electrical fault smell like fish?

The plastic in electrical fittings is made with chemicals that release a fishy odour when they get too hot. You’ll often smell it before you see any scorch mark. By the time there’s a brown stain on the plate, the part has been running hot for a while.

Where does the smell usually come from?

  • A power point with a heavy appliance on it, like a heater, air fryer or kettle.
  • A loose plug or a worn double adaptor.
  • A light switch or dimmer that has failed.
  • A light fitting, especially an old one with a hot globe close to the plastic.
  • An appliance plug or a cheap power board.
  • The switchboard.

Walk the house and sniff close to each one. The smell is strongest at the source.

Could the fishy smell be something else?

It could. A dead animal in the wall cavity or roof, a drain or rotting food can all smell similar. The clue for electrical is that the smell sits near a fitting, comes and goes with an appliance or light being on, or arrives with flickering or a warm plate. If you can’t find a non-electrical cause, assume it’s electrical.

Is a fishy electrical smell dangerous?

It means something is hotter than it should be, and heat in electrical fittings can lead to a fire. It isn’t a reason to panic. It is a reason to stop using that point or light and get it checked soon, the same day if it’s getting stronger.

What should I do right now?

Switch off and unplug the appliance on the point if it’s safe to touch. Turn off that circuit at the switchboard. If you see smoke or the plate is too hot to touch, switch off the main switch, get out and call 000.

Leave the cover plates on. In Queensland only a licensed electrician can open up and repair power points, switches and fittings. See also a burning smell from a power point.

Who can track down the smell?

Andrew at Fins Up Electrical finds the hot part, replaces it, and checks the rest of that circuit for the same problem. Free fixed quote before we start. We cover the Redcliffe peninsula and Moreton Bay and we’re open 24 hours Monday to Saturday, licence 91921. See electrical repairs.

Want this sorted? Electrical repairs from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

Why does my power point smell like fish?

The plastic inside is overheating, usually from a loose terminal or a heavy load. Stop using it and have it checked.

Can a light switch smell fishy?

Yes. A failing switch or dimmer heats up and gives off the same smell. Turn the light off and get it replaced.

Will the smell go away by itself?

It may fade once the load comes off, but the overheating part is still there and will smell again next time it’s used.

Sources

The service