Blog

Can electrical faults cause a house fire?

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

Yes. A loose connection, an overloaded power board, damaged wiring or an old halogen downlight buried in insulation can all heat up enough to start a fire. Most give warning first, through a burning smell, a warm or discoloured switch, buzzing or flickering, so those signs are worth acting on the day you notice them.

How does an electrical fault start a fire?

Heat. A terminal that has worked loose makes poor contact at the screw, and that spot gets hot. Over weeks it can scorch the plastic around it, then the timber behind it. An overloaded lead or power board does the same thing along its whole length. Arcing, where current jumps a small gap, throws off enough heat to ignite dust or insulation.

What are the warning signs?

  • A burning or hot plastic smell near a power point, switch or the switchboard.
  • A power point or switch plate that feels warm, or has brown marks.
  • Buzzing or crackling from a switch or fitting.
  • Lights that flicker or dim for no clear reason.
  • A circuit breaker that keeps tripping on the same circuit.
  • A plug that’s loose in the power point or comes out warm.

Any one of these is worth a call. Smoke or a scorched point is urgent.

Which parts of a house are the usual culprits?

Power points with heavy loads on them, like heaters, kettles and air fryers. Power boards plugged into power boards. Old halogen downlights and their transformers, which run hot and must never be covered by insulation. Old switchboards with rewireable fuses, where the wrong fuse wire can let a cable overheat with nothing to stop it.

More detail in our posts on a burning smell from a power point and downlights and ceiling insulation.

Does a safety switch stop electrical fires?

Partly. A safety switch cuts power when current leaks to earth, which protects people from shock and catches some faults early. It won’t trip on a loose terminal that is heating up, because no current is leaking. Circuit breakers trip on overload. Neither one replaces fixing the hot connection, and that’s why a warm switch needs an electrician even when nothing has tripped.

What should I do if I smell burning?

If you can do it safely, switch off that circuit at the switchboard, or the main switch. Unplug nothing that’s hot or smoking. If there’s smoke or flame, get everyone out and call 000. If it’s a smell and no smoke, call an electrician and leave the circuit off until it’s checked.

Don’t take off the cover plate to have a look. In Queensland, opening up a power point or switch is electrical work for a licensed electrician.

Can Fins Up check my home for fire risks?

Yes. Andrew checks warm points, scorched fittings, old downlights and the switchboard, then tells you what’s a problem and what isn’t. We do urgent make-safes too, including exposed live wires, and we’re open 24 hours Monday to Saturday. Free fixed quote before any work. Licence 91921. See electrical repairs.

Want this sorted? Electrical repairs from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

Can a loose power point cause a fire?

Yes. A loose terminal behind the plate makes poor contact and heats up, which can scorch the point and the wall around it.

Can LED downlights cause fires?

They run much cooler than halogens, but they still need a fitting rated for the insulation around it. Old halogens are the bigger risk.

Should I turn the power off if a switch feels warm?

Turn that circuit off at the switchboard if you can do it safely, and have an electrician check it before you use it again.

Sources

The service