Blog

Burning smell from a power point

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

A burning smell from a power point means something is overheating, usually a loose connection behind the point, a worn-out outlet, or a plug that’s overloaded or damaged. Stop using it now. Switch off and unplug if you can do it without touching anything hot, switch that circuit off at the switchboard, and get a licensed electrician to check it before it’s used again.

What should I do in the next five minutes?

  1. If there’s smoke or flame, get everyone out and call 000. Don’t try to fight an electrical fire with water.
  2. If not, switch the power point off and pull the plug out, as long as the plug and point aren’t hot or melted. If they are, leave them.
  3. Switch off that circuit at the switchboard if you can safely. If you don’t know which one, switching off the power points circuit is fine for now.
  4. Don’t use the point again until it’s been checked.

If anyone has felt a tingle or shock from the point or anything nearby, don’t touch the switchboard. Call Energex on 13 19 62 and keep clear until it’s made safe.

What causes a power point to smell like burning?

  • A loose connection behind the plate. The wire works loose, current arcs across the gap, and the heat cooks the plastic.
  • A worn outlet. The spring contacts inside lose their grip on the plug pins, which creates heat.
  • An overloaded point. Double adaptors and power boards running heaters, kettles or air fryers at once push a lot of current through one outlet.
  • A damaged plug or cord on the appliance itself.

A fishy smell is a common early sign. Many plastics used in fittings smell fishy as they heat, well before they smell burnt.

What signs can I look for without opening it?

  • Brown or black marks on the plate or around the holes
  • A plug that feels warm or hot after use
  • Melted or warped plastic on the plug or the point
  • A plug that falls out easily or feels loose
  • Buzzing or crackling when something is plugged in

Look, don’t open. Taking the cover off a power point is electrical work, and in Queensland only a licensed electrician can do it.

Is it safe to use the other power points?

Use the rest of the house carefully until it’s checked. If the fault is a loose connection, other points on the same circuit may share the same wiring, so that circuit is best left off. Don’t plug a heater or other heavy appliance into another point on a power board to get around the problem.

How do I stop it happening again?

  • Don’t run heaters, kettles, air fryers or other high-draw appliances off the same double adaptor or power board.
  • Replace appliances with damaged plugs or cords.
  • Pull plugs out by the plug, not the cord.
  • If a plug feels warm after use, stop using that point and get it checked.
  • If you rely on power boards in a room, that’s a sign you need more outlets.

Most scorched points we see have been working hard for years. The kettle point in the kitchen and the heater point in the lounge are the usual ones.

What will an electrician do?

We isolate the circuit, open the point and check the connections behind it and at the next point along. A scorched outlet gets replaced, and any heat-damaged cable gets cut back or replaced. We test the circuit before handing it back. If you’re short on points and running everything off power boards, we can add more power points so it doesn’t happen again.

Fins Up Electrical is open 24 hours Monday to Saturday. A burning smell is a good reason to call after hours rather than wait. We’ve done urgent make-safes on exposed live wires and after-hours call-outs on a Friday night. Andrew holds licence 91921 and will quote the repair free before starting.

Want this sorted? Electrical repairs from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

Is a burning smell from a power point an emergency?

Yes, treat it as one. Stop using it, switch off the circuit if you safely can, and call a licensed electrician. If there’s smoke or flame, call 000.

Why does my power point smell like fish?

Many plastics in electrical fittings give off a fishy smell as they overheat. It’s an early warning of a hot connection.

Can I replace a scorched power point myself?

No. In Queensland replacing a power point is electrical work and must be done by a licensed electrician. DIY electrical work is illegal.

Why didn’t my safety switch trip?

Safety switches react to current leaking to earth, not to a hot connection. A loose connection can overheat without tripping anything.

Sources

The service