A Queensland rental must have photoelectric, interconnected smoke alarms built to AS 3786-2014 in every bedroom, in hallways connecting bedrooms to the rest of the home, and on every storey. This has applied to every new or renewed lease since 1 January 2022. The landlord must also test and clean the alarms within 30 days before each tenancy starts or is renewed.
Which rental properties have to comply?
All of them. The Residential Tenancies Authority says rental homes classed as domestic dwellings must have interconnected, photoelectric smoke alarms. That covers houses, townhouses, units, apartments and secondary dwellings like a granny flat.
The trigger was 1 January 2022. Since then, the full standard has applied the moment a new tenancy starts or an existing one is renewed. If you’ve had the same tenant on a rolling lease since before 2022, the final deadline of 1 January 2027 catches you anyway. In practice, almost every rental in Queensland should already comply.
What does a compliant rental smoke alarm setup look like?
Every alarm must be:
- Photoelectric, with no ionisation sensor.
- Marked AS 3786-2014.
- Interconnected with every other alarm in the home.
- Hardwired to mains power, or powered by a 10-year non-removable battery.
- Less than 10 years old, and working when tested.
They go in every bedroom, in hallways that connect bedrooms to the rest of the home (or between bedrooms and the rest of the storey if there’s no hallway), and on every storey. On a storey with no bedrooms, at least one goes on the most likely path out. If any existing alarm is hardwired, its replacement must be hardwired too, and that’s a job for a licensed electrician.
What does the landlord have to do at each lease?
The RTA lists the owner or property manager duties:
- Test and clean every smoke alarm within 30 days before a tenancy starts, including a renewed tenancy.
- Replace any flat or nearly flat batteries within that same 30 day window.
- Replace any alarm that doesn’t work when tested, straight away.
- Replace any alarm within 10 years of its manufacture date.
- Give the tenant an entry notice at least 48 hours before coming in to install, test or replace alarms.
The landlord can’t hand these jobs to the tenant. Asking a new tenant to test the alarms at move-in doesn’t satisfy the rule. A smoke alarm that isn’t working can also be treated as an emergency repair.
What are the tenant’s responsibilities?
Tenants have a smaller list. During the tenancy they must:
- Test and clean the alarms at least once every 12 months.
- Replace flat or nearly flat batteries where the alarm has a replaceable backup battery.
- Tell the landlord or property manager about any problem with an alarm.
- Never remove an alarm or do anything that stops it working, like covering it or taking the battery out.
Testing and cleaning follow the manufacturer’s instructions and don’t need a tradesperson. Anything involving the wiring of a hardwired alarm does.
Do rentals need safety switches too?
Yes, and it’s a separate rule that landlords often miss. The Electrical Safety Office says a landlord renting out a domestic property must have approved safety switches on all power point circuits within 90 days after the tenancy agreement starts. If your rental still has an old board with ceramic fuses, that usually means a switchboard upgrade at the same time.
How do landlords and agents get it sorted?
The easiest time is between tenants, when the place is empty and nobody needs an entry notice. One visit can check the alarms, replace anything old or non-compliant, link them all together, and test the safety switches.
Fins Up Electrical does this work for landlords and real estate agencies across the Redcliffe peninsula and Moreton Bay. We’re open 24 hours Monday to Saturday, so a dead alarm reported on a Friday night doesn’t have to wait until next week. Quotes are free and fixed before we start. See our smoke alarm installation page.
Want this sorted? Smoke alarm installation from Fins Up.
Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.
Common questions
How often do landlords have to test smoke alarms in QLD?
Within 30 days before every new tenancy or renewed tenancy starts. The landlord must also replace any alarm that fails a test straight away.
Can a QLD landlord make the tenant test the smoke alarms at move-in?
No. The RTA says landlords and property managers can’t pass their testing obligations on to the tenant.
How often does a tenant have to test smoke alarms?
At least once every 12 months during the tenancy, along with cleaning them and reporting any fault to the landlord.
Does a granny flat need its own smoke alarms?
Yes. The RTA includes secondary dwellings in the domestic dwellings that must have interconnected photoelectric smoke alarms.