Blog

What is a switchboard upgrade?

· 3 min read · Fins Up Electrical, licence 91921

5.0 on GoogleLicence 91921Open 24 hours, Mon to SatFree quotes

A switchboard upgrade replaces the old fuses or circuit breakers in your meter box with modern circuit breakers and safety switches that protect people from electric shock. The work usually includes a new enclosure, labelled circuits, and testing every circuit before the power goes back on. Most homes are back on power the same day.

What does a switchboard do?

Your switchboard is where power from the street gets split into the circuits that run your house: lights, power points, oven, hot water, air conditioning. Each circuit has a protective device on the board.

There are two kinds of protection, and they do different jobs. The Electrical Safety Office explains it simply:

  • Circuit breakers and fuses protect the wiring. They cut power when too much current flows, which stops cables overheating and starting a fire.
  • Safety switches (also called RCDs) protect people. They cut power within milliseconds when they detect current leaking, like through a person touching a faulty appliance.

An old board usually has only the first kind. A switchboard upgrade gives you both.

What gets replaced in a switchboard upgrade?

It depends on what you have, but a typical upgrade covers:

  • Removing old ceramic fuses or worn breakers.
  • Fitting new circuit breakers, sized to the cable on each circuit.
  • Fitting safety switches across the circuits. Since 2000, new Queensland homes need them on all power point and lighting circuits, and the Electrical Safety Office recommends them on every circuit, including air con, oven, hot water and pool equipment.
  • A new enclosure or mounting panel where the old one is damaged, full, or may contain asbestos.
  • New main switch and neutral and earth connections.
  • Labelling every circuit so you know what each switch does.
  • Room for future circuits like solar, a battery or an EV charger.

What happens on the day?

The power is off for most of the job, so plan for that. The rough order:

  1. Test and identify every existing circuit.
  2. Isolate the supply and remove the old board.
  3. Install the new board, breakers and safety switches.
  4. Reconnect each circuit.
  5. Test every circuit and every safety switch before switching back on.

If the job needs the power cut at the street, the network has to be booked in and that sets the date. Keep fridge and freezer doors shut while the power is off.

Why would a switchboard upgrade find other problems?

Because safety switches are sensitive. An old fuse board will happily run a circuit with a slight fault for years. Put a safety switch on that circuit and it trips, because now something is watching for leakage.

Common culprits are old outdoor power points with water in them, worn appliance leads, damaged cables in the roof, and old light fittings. Finding these is a good thing. They were always there. The upgrade just made them visible. Your electrician will tell you what was found and quote any repairs before doing them.

Who can do a switchboard upgrade?

Only a licensed electrician. The Electrical Safety Office says only a licensed electrician can install a safety switch, and any work on the board is electrical work under the Electrical Safety Act. If the board might contain asbestos, there are extra steps for removing it safely.

Check the electrician’s contractor licence number on the Electrical Safety Office’s licence search before you book anyone.

Where does Fins Up come in?

Switchboard upgrades are a regular job for us across the Redcliffe peninsula and out to Caboolture. Andrew, with 16 years on the tools, checks the board, explains what needs to change, and gives you a free fixed quote before any work starts. Licence 91921. Read more on our switchboard upgrades page, or see the signs your board needs one.

Want this sorted? Switchboard upgrades from Fins Up.

Licensed electrician, licence 91921. Free quote before any work starts. Open 24 hours Monday to Saturday.

Common questions

How long does a switchboard upgrade take?

Most homes are done within a day. Bigger boards, extra circuits, asbestos panels or a supply disconnection from the network can stretch that out.

Will a switchboard upgrade fix my tripping problem?

Not always. If the cause is a faulty appliance or damaged wiring, a new safety switch will still trip until that fault is found and fixed.

Is a safety switch the same as a circuit breaker?

No. Circuit breakers protect the wiring from overload. Safety switches protect people from electric shock. Some devices combine both.

Sources

The service